Sale!

ET9200-10-220-3 By Danfoss | Hydraulic Hose Saw | 3 HP, 220 VAC, 3 Phase

Original price was: $327.00.Current price is: $99.99.

SKU: AG9ZZ 1481573072932 Category: Tools & Equipment Tags: Aeroquip Distributor, Aeroquip Tools and Equipment, All-categories, Collection-lvl1_All Equipment, Collection-lvl2_Hose Equipment, Collection-lvl3_Cutting Tools, Cutoff Saws and Replacement Blades, Hose-equipment, Hydraulic Hoses and Fittings, LegacyProductTypeReplacement_All Categories, Matrixify1st50kProducts

100% Quality Satisfaction
Friendly, efficient service, always online.
7 days free returns
Safe Payments, Happy Customers

Description
Reviews (0)

Introduction:
Eaton hydraulic hose cutting system is break-through technology using a toothed blade, cutting with the backs of each tooth, so the blade does not take a kerf. The saw bends the hose into the blade spreading the cut edges to avoid burning and smoking.
Benefits:
Cleaner Cuts Safer Cuts No Smoke
How It Works:
Old Method The normal sawing method of lowering an abrasive saw blade onto the hose causes the hose to compress and deform. As the blade cuts the compressed hosed expands against the blade causing friction, heating and burning and much of the debris from the kerf of the blade is deposited into your hose. New Improved Eaton Method With the Eaton hydraulic hose saws the hose is positioned across two pins (A) and moved into the blade (C) by a feed foot (B) using extendable handle (D) for better leverage on extremely heavy hose. The feed motion causes the hose to stretch at the point of contact with the blade, allowing it to separate as it is cut (see image at below). This separation allows the hose to pass clear of the saw blade with NO friction, NO heating and NO DEBRIS! A vacuum hose (not shown) is attached to a vacuum port to remove any tiny amount of debris or smoke during cutting.

ET9200 Hydraulic Hose Cutting Blades
Part Number	Type	Blade Size	Cutting Capacity
ET9200C-10-AS	Advanced Scallop Blade	10″ OD x .125 THK X 40 mm arbor	2″ ID x 4 Wire Hydraulic Hose
ET9200C-10-MS	Micro-Slotted Blade	10″ OD x .125 THK X 40 mm arbor	2″ ID x 4 Wire Hydraulic Hose
ET9200C-10-D	Diamond Blade	10″ OD x .125 THK X 40 mm arbor	2″ ID x 6 Wire Hydraulic Hose
ET9200C-10-SM	Smooth Blade	10″ OD x .125 THK X 40 mm arbor	2″ ID x 4 Wire Hydraulic Hose
ET9200C-10-SC	Scalloped Blade	10″ OD x .125 THK X 40 mm arbor	2″ ID x 4 Wire Hydraulic Hose
ET9200C-10-SL	Slotted Blade	10″ OD x .125 THK X 40 mm arbor	2″ ID x 4 Wire Hydraulic Hose

ET9200 Hydraulic Hose Saws
Part Number	Motor	Blade	Cutting Capacity
ET9200-10-220	5 HP, 220 VAC, 1 Phase, 60 Cycle, 3,600 RPM	One 10″ OD x .125 THK X 40 mm arbor	2″ ID x 6 Wire Hydraulic Hose
ET9200-10-220-3	3 HP, 220 VAC, 3 Phase, 60 Cycle, 3,600 RPM	One 10″ OD x .125 THK X 40 mm arbor	2″ ID x 6 Wire Hydraulic Hose
ET9200-10-440-3	3 HP, 440 VAC, 3 Phase, 60 Cycle, 3,600 RPM	One 10″ OD x .125 THK X 40 mm arbor	2″ ID x 6 Wire Hydraulic Hose
ET9200-10-12v	4 HP, 12 VDC, 4,000 RPM	One 10″ OD x .125 THK X 40 mm arbor	2″ ID x 4 Wire Hydraulic Hose
ET9200-10-24v	4 HP, 24 VDC, 4,000 RPM	One 10″ OD x .125 THK X 40 mm arbor	2″ ID x 4 Wire Hydraulic Hose