3210354-100 By NewAge | Fluoropolymer PFA Tubing | 4mm ID X 6mm OD X 1mm Wall | Clear | 100ft

Application:	Adhesives, Beverage, Chemicals, Corrosives, Cryogenics, Deionized Water Transfer, Food, Laboratory, Lighting Covers, Medical, Paint Spray, Pure Air Systems, Pure Fluid Systems, Solvents, Water Sampling, Wire Insulation	Tube:	Fluoropolymer PFA
Reinforcement:	Unreinforced	Cover:	N/A
Temperature Range:	500°F	Color:	Clear
Opacity:	Transparent	Specifications	Conflict Mineral Free, FDA, REACH, RoHS, USP class VI
Other Features:
Chemically inert; low permeability Manufactured from FDA compliant raw materials Lowest coefficient of friction of any solid material Excellent electrical and weathering properties; non-flammable Made without plasticizer which can leach into critical streams Free of animal derived components Raw materials are FDA and USP Class VI compliant REACH and RoHS compliant PTFE is free of BPA, phthalates and latex FEP and PFA are free of conflict minerals Ultra-high-purity grades available for the semiconductor industry (FEP and PFA only) Made in the USA
Notes:
Almost totally inert, Fluoropolymer can be used with virtually all industrial solvents, chemicals, and corrosive materials, even at elevated temperatures. It does, however, react with fluorine, molten sodium hydroxide, and molten alkali metals. Fluoropolymer Tubing can be steam or chemically sterilized in-line with any industrial cleaner, solvent, or sterilizing method. Fluoropolymer’s non-stick property allows transport of viscous, sticky materials without line clogging. It also offers outstanding aging resistance. PTFE’s translucent white color will vary naturally from lot to lot, however, the quality and physical properties do not change. FEP & PFA are clearer and can be heat sealed and heat bonded.

Physical Properties**
	PTFE	FEP	PFA
Hardness, Shore D	50-65	57-60	60
Tensile Strength, psi	2000-3000	4000	4200
Elongation at Break, %	200-450	400	400
Brittle Temperature
Max. Continuous Op. Temp.	500°F	400°F	500°F

**Values listed are typical for the material used in manufacture, except where noted, and are meant only as a guide to aid in design. Field testing should be performed to find the actual values for your application.

Part Number	Inside Diameter (in.)	Outside Diameter (in.)	Wall Thickness (in.)	Length	Working PSI (at 73°F)	Bend Radius (in.)	Bend Radius (mm)
3200176-50	0.063″ (1/16″)	0.125″ (1/8″)	0.030″	50ft	449 PSI	1/2″	–
3200330-100	0.094″ (3/32″)	0.156″ (5/32″)	0.030″	100ft	360 PSI	1/2″	–
3200407-50	0.125″ (1/8″)	0.188″ (3/16″)	0.030″	50ft	299 PSI	3/4″	–
3200407-100	0.125″ (1/8″)	0.188″ (3/16″)	0.030″	100ft	299 PSI	3/4″	–
3200484-50	0.125″ (1/8″)	0.250″ (1/4″)	0.063″ (1/16″)	50ft	464 PSI	1/2″	–
3200484-100	0.125″ (1/8″)	0.250″ (1/4″)	0.063″ (1/16″)	100ft	464 PSI	1/2″	–
3200561-50	0.188″ (3/16″)	0.250″ (1/4″)	0.030″	50ft	225 PSI	1″	–
3200561-100	0.188″ (3/16″)	0.250″ (1/4″)	0.030″	100ft	225 PSI	1″	–
3200715-100	0.250″ (1/4″)	0.313″ (5/16″)	0.030″	100ft	179 PSI	1-3/4″	–
3200792-25	0.250″ (1/4″)	0.375″ (3/8″)	0.063″ (1/16″)	25ft	310 PSI	1″	–
3200792-50	0.250″ (1/4″)	0.375″ (3/8″)	0.063″ (1/16″)	50ft	310 PSI	1″	–
3200792-100	0.250″ (1/4″)	0.375″ (3/8″)	0.063″ (1/16″)	100ft	310 PSI	1″	–
3201100-25	0.375″ (3/8″)	0.500″ (1/2″)	0.063″ (1/16″)	25ft	310 PSI	1″	–
3201100-50	0.375″ (3/8″)	0.500″ (1/2″)	0.063″ (1/16″)	50ft	310 PSI	1″	–
3201100-100	0.375″ (3/8″)	0.500″ (1/2″)	0.063″ (1/16″)	100ft	310 PSI	1″	–
3201331-25	0.500″ (1/2″)	0.563″ (9/16″)	0.030″	25ft	88 PSI	12″	–
3201331-100	0.500″ (1/2″)	0.563″ (9/16″)	0.030″	100ft	88 PSI	12″	–
3201716-25	0.625″ (5/8″)	0.750″ (3/4″)	0.063″ (1/16″)	25ft	155 PSI	6″	–
3201716-50	0.625″ (5/8″)	0.750″ (3/4″)	0.063″ (1/16″)	50ft	155 PSI	6″	–
3201716-100	0.625″ (5/8″)	0.750″ (3/4″)	0.063″ (1/16″)	100ft	155 PSI	6″	–
Metric Tubing
3210354-50	4mm	6mm	1mm	50ft	312 PSI	–	44mm
3210354-100	4mm	6mm	1mm	100ft	312 PSI	–	44mm
3210529-50	6mm	8mm	1mm	50ft	234 PSI	–	64mm
3210704-50	8mm	10mm	1mm	50ft	187 PSI	–	70mm
3210704-100	8mm	10mm	1mm	100ft	187 PSI	–	70mm

Sold by standard coil length only
I.D. dimension is REFERENCE.
Working pressures are calculated from burst testing using a 3:1 safety factor. Application testing is recommended.
All PFA lengths are supplied in single-section packages.