3100321-100 By NewAge | Fluoropolymer FEP Tubing | 1/8″ ID X 3/16″ OD X 0.030″ Wall | Clear | 100ft

Application:	Adhesives, Beverage, Chemicals, Corrosives, Cryogenics, Deionized Water Transfer, Food, Laboratory, Lighting Covers, Medical, Paint Spray, Pure Air Systems, Pure Fluid Systems, Solvents, Water Sampling, Wire Insulation	Tube:	Fluoropolymer FEP
Reinforcement:	Unreinforced	Cover:	N/A
Temperature Range:	400°F	Color:	Clear
Opacity:	Transparent	Specifications	Non-flammable, Conflict Mineral Free, FDA, REACH, RoHS, USP class VI
Other Features:
Chemically inert; low permeability Manufactured from FDA compliant raw materials Lowest coefficient of friction of any solid material Excellent electrical and weathering properties; non-flammable Made without plasticizer which can leach into critical streams Free of animal derived components Raw materials are FDA and USP Class VI compliant REACH and RoHS compliant PTFE is free of BPA, phthalates and latex FEP and PFA are free of conflict minerals Ultra-high-purity grades available for the semiconductor industry (FEP and PFA only) Made in the USA
Notes:
Almost totally inert, Fluoropolymer can be used with virtually all industrial solvents, chemicals, and corrosive materials, even at elevated temperatures. It does, however, react with fluorine, molten sodium hydroxide, and molten alkali metals. Fluoropolymer Tubing can be steam or chemically sterilized in-line with any industrial cleaner, solvent, or sterilizing method. Fluoropolymer’s non-stick property allows transport of viscous, sticky materials without line clogging. It also offers outstanding aging resistance. PTFE’s translucent white color will vary naturally from lot to lot, however, the quality and physical properties do not change. FEP & PFA are clearer and can be heat sealed and heat bonded.

Physical Properties**
	PTFE	FEP	PFA
Hardness, Shore D	50-65	57-60	60
Tensile Strength, psi	2000-3000	4000	4200
Elongation at Break, %	200-450	400	400
Brittle Temperature
Max. Continuous Op. Temp.	500°F	400°F	500°F

**Values listed are typical for the material used in manufacture, except where noted, and are meant only as a guide to aid in design. Field testing should be performed to find the actual values for your application.

Part Number	Inside Diameter (in.)	Outside Diameter (in.)	Wall Thickness (in.)	Length	Working PSI (at 73°F)	Bend Radius (in.)	Bend Radius (mm)
3100090-50	0.063″ (1/16″)	0.125″ (1/8″)	0.030″	50ft	445 PSI	1/2″	–
3100090-100	0.063″ (1/16″)	0.125″ (1/8″)	0.030″	100ft	445 PSI	1/2″	–
3100244-100	0.094″ (3/32″)	0.156″ (5/32″)	0.030″	100ft	360 PSI	1/2″	–
3100321-50	0.125″ (1/8″)	0.188″ (3/16″)	0.030″	50ft	296 PSI	3/4″	–
3100321-100	0.125″ (1/8″)	0.188″ (3/16″)	0.030″	100ft	296 PSI	3/4″	–
3100398-50	0.125″ (1/8″)	0.250″ (1/4″)	0.063″ (1/16″)	50ft	460 PSI	1″	–
3100398-100	0.125″ (1/8″)	0.250″ (1/4″)	0.063″ (1/16″)	100ft	460 PSI	1″	–
3100552-50	0.188″ (3/16″)	0.250″ (1/4″)	0.030″	50ft	223 PSI	1-1/2″	–
3100552-100	0.188″ (3/16″)	0.250″ (1/4″)	0.030″	100ft	223 PSI	1-1/2″	–
3100629-50	0.188″ (3/16″)	0.313″ (5/16″)	0.063″ (1/16″)	50ft	368 PSI	1-1/2″	–
3100629-100	0.188″ (3/16″)	0.313″ (5/16″)	0.063″ (1/16″)	100ft	368 PSI	1-1/2″	–
3100706-100	0.250″ (1/4″)	0.313″ (5/16″)	0.030″	100ft	178 PSI	1-3/4″	–
3100783-25	0.250″ (1/4″)	0.375″ (3/8″)	0.063″ (1/16″)	25ft	307 PSI	1″	–
3100783-50	0.250″ (1/4″)	0.375″ (3/8″)	0.063″ (1/16″)	50ft	307 PSI	1″	–
3100783-100	0.250″ (1/4″)	0.375″ (3/8″)	0.063″ (1/16″)	100ft	307 PSI	1″	–
3100860-50	0.313″ (5/16″)	0.375″ (3/8″)	0.030″	50ft	148 PSI	2-1/2″	–
3100860-100	0.313″ (5/16″)	0.375″ (3/8″)	0.030″	100ft	148 PSI	2-1/2″	–
3101014-50	0.375″ (3/8″)	0.438″ (7/16″)	0.030″	50ft	127 PSI	3-1/2″	–
3101014-100	0.375″ (3/8″)	0.438″ (7/16″)	0.030″	100ft	127 PSI	3-1/2″	–
3101091-25	0.375″ (3/8″)	0.500″ (1/2″)	0.063″ (1/16″)	25ft	230 PSI	2″	–
3101091-50	0.375″ (3/8″)	0.500″ (1/2″)	0.063″ (1/16″)	50ft	230 PSI	2″	–
3101091-100	0.375″ (3/8″)	0.500″ (1/2″)	0.063″ (1/16″)	100ft	230 PSI	2″	–
3101168-100	0.438″ (7/16″)	0.500″ (1/2″)	0.030″	100ft	111 PSI	6″	–
3101322-25	0.500″ (1/2″)	0.563″ (9/16″)	0.030″	25ft	89 PSI	12″	–
3101322-50	0.500″ (1/2″)	0.563″ (9/16″)	0.030″	50ft	89 PSI	12″	–
3101399-50	0.500″ (1/2″)	0.625″ (5/8″)	0.063″ (1/16″)	50ft	184 PSI	3″	–
3101399-100	0.500″ (1/2″)	0.625″ (5/8″)	0.063″ (1/16″)	100ft	184 PSI	3″	–
3101707-25	0.625″ (5/8″)	0.750″ (3/4″)	0.063″ (1/16″)	25ft	153 PSI	6″	–
3101707-50	0.625″ (5/8″)	0.750″ (3/4″)	0.063″ (1/16″)	50ft	153 PSI	6″	–
3101707-100	0.625″ (5/8″)	0.750″ (3/4″)	0.063″ (1/16″)	100ft	153 PSI	6″	–
3102015-10	0.750″ (3/4″)	0.875″ (7/8″)	0.063″ (1/16″)	10ft Straight	132 PSI	12″	–
3102169-10	0.875″ (7/8″)	1.000″	0.063″ (1/16″)	10ft Straight	115 PSI	22″	–
3102246-5	1.000″	1.100″	0.050″	5ft Straight	75 PSI	26″	–
3102323-10	1.000″	1.125″ (1-1/8″)	0.063″ (1/16″)	10ft Straight	75 PSI	24″	–
Metric Tubing
3110177-50	2mm	4mm	1mm	50 ft	464 PSI	–	38mm
3110352-50	4mm	6mm	1mm	50 ft	309 PSI	–	44mm
3110352-100	4mm	6mm	1mm	100 ft	309 PSI	–	44mm
3110527-50	6mm	8mm	1mm	50 ft	232 PSI	–	64mm
3110527-100	6mm	8mm	1mm	100 ft	232 PSI	–	64mm
3110702-50	8mm	10mm	1mm	50 ft	186 PSI	–	70mm
3110702-100	8mm	10mm	1mm	100 ft	186 PSI	–	70mm
3110877-50	10mm	12mm	1mm	50 ft	155 PSI	–	102mm
3110877-100	10mm	12mm	1mm	100 ft	155 PSI	–	102mm
3111052-100	12mm	14mm	1mm	100 ft	119 PSI	–	305mm

Sold by standard coil length only
I.D. dimension is REFERENCE.
Working pressures are calculated from burst testing using a 3:1 safety factor. Application testing is recommended.
All FEP lengths are supplied in single-section packages.