3010700-25 By NewAge | Fluoropolymer PTFE Tubing | 8mm ID X 10mm OD X 1mm Wall | White | 25ft

Application:	Adhesives, Beverage, Chemicals, Corrosives, Cryogenics, Deionized Water Transfer, Food, Laboratory, Lighting Covers, Medical, Paint Spray, Pure Air Systems, Pure Fluid Systems, Solvents, Water Sampling, Wire Insulation	Tube:	Fluoropolymer PTFE
Reinforcement:	Unreinforced	Cover:	N/A
Temperature Range:	500°F	Color:	White
Opacity:	Translucent	Specifications	BPA Free, FDA, Latex Free, Phthalate Free, REACH, RoHS, USP class VI
Other Features:
Chemically inert; low permeability Manufactured from FDA compliant raw materials Lowest coefficient of friction of any solid material Excellent electrical and weathering properties; non-flammable Made without plasticizer which can leach into critical streams Free of animal derived components Raw materials are FDA and USP Class VI compliant REACH and RoHS compliant PTFE is free of BPA, phthalates and latex FEP and PFA are free of conflict minerals Ultra-high-purity grades available for the semiconductor industry (FEP and PFA only) Made in the USA
Notes:
Almost totally inert, Fluoropolymer can be used with virtually all industrial solvents, chemicals, and corrosive materials, even at elevated temperatures. It does, however, react with fluorine, molten sodium hydroxide, and molten alkali metals. Fluoropolymer Tubing can be steam or chemically sterilized in-line with any industrial cleaner, solvent, or sterilizing method. Fluoropolymer’s non-stick property allows transport of viscous, sticky materials without line clogging. It also offers outstanding aging resistance. PTFE’s translucent white color will vary naturally from lot to lot, however, the quality and physical properties do not change. FEP & PFA are clearer and can be heat sealed and heat bonded.

Physical Properties**
	PTFE	FEP	PFA
Hardness, Shore D	50-65	57-60	60
Tensile Strength, psi	2000-3000	4000	4200
Elongation at Break, %	200-450	400	400
Brittle Temperature
Max. Continuous Op. Temp.	500°F	400°F	500°F

**Values listed are typical for the material used in manufacture, except where noted, and are meant only as a guide to aid in design. Field testing should be performed to find the actual values for your application.

Part Number	Inside Diameter (in.)	Outside Diameter (in.)	Wall Thickness (in.)	Length	Working PSI (at 73°F)	Bend Radius (in.)	Bend Radius (mm)
3000074-100	0.031″ (1/32″)	0.063″ (1/16″)	0.016″	100ft	412 PSI	1/2″	–
3000151-100	0.031″ (1/32″)	0.094″ (3/32″)	0.030″	100ft	390 PSI	1/2″	–
3000228-50	0.063″ (1/16″)	0.125″ (1/8″)	0.030″	50ft	290 PSI	1/2″	–
3000228-100	0.063″ (1/16″)	0.125″ (1/8″)	0.030″	100ft	290 PSI	1/2″	–
3000382-50	0.094″ (3/32″)	0.156″ (5/32″)	0.030″	50ft	220 PSI	5/8″	–
3000382-100	0.094″ (3/32″)	0.156″ (5/32″)	0.030″	100ft	220 PSI	5/8″	–
3000459-50	0.125″ (1/8″)	0.188″ (3/16″)	0.030″	50ft	180 PSI	3/4″	–
3000459-100	0.125″ (1/8″)	0.188″ (3/16″)	0.030″	100ft	180 PSI	3/4″	–
3000536-50	0.125″ (1/8″)	0.250″ (1/4″)	0.063″ (1/16″)	50ft	310 PSI	1/2″	–
3000536-100	0.125″ (1/8″)	0.250″ (1/4″)	0.063″ (1/16″)	100ft	310 PSI	1/2″	–
3000690-50	0.188″ (3/16″)	0.250″ (1/4″)	0.030″	50ft	130 PSI	1″	–
3000690-100	0.188″ (3/16″)	0.250″ (1/4″)	0.030″	100ft	130 PSI	1″	–
3000767-50	0.188″ (3/16″)	0.313″ (5/16″)	0.063″ (1/16″)	50ft	222 PSI	7/8″	–
3000767-100	0.188″ (3/16″)	0.313″ (5/16″)	0.063″ (1/16″)	100ft	222 PSI	7/8″	–
3000844-100	0.250″ (1/4″)	0.313″ (5/16″)	0.030″	100ft	100 PSI	2-1/4″	–
3000921-25	0.250″ (1/4″)	0.375″ (3/8″)	0.063″ (1/16″)	25ft	207 PSI	1″	–
3000921-50	0.250″ (1/4″)	0.375″ (3/8″)	0.063″ (1/16″)	50ft	207 PSI	1″	–
3000921-100	0.250″ (1/4″)	0.375″ (3/8″)	0.063″ (1/16″)	100ft	207 PSI	1″	–
3000998-25	0.313″ (5/16″)	0.375″ (3/8″)	0.030″	25ft	80 PSI	2-3/4″	–
3000998-50	0.313″ (5/16″)	0.375″ (3/8″)	0.030″	50ft	80 PSI	2-3/4″	–
3000998-100	0.313″ (5/16″)	0.375″ (3/8″)	0.030″	100ft	80 PSI	2-3/4″	–
3001152-100	0.375″ (3/8″)	0.438″ (7/16″)	0.030″	100ft	70 PSI	4″	–
3001229-25	0.375″ (3/8″)	0.500″ (1/2″)	0.063″ (1/16″)	25ft	155 PSI	2-1/4″	–
3001229-50	0.375″ (3/8″)	0.500″ (1/2″)	0.063″ (1/16″)	50ft	155 PSI	2-1/4″	–
3001229-100	0.375″ (3/8″)	0.500″ (1/2″)	0.063″ (1/16″)	100ft	155 PSI	2-1/4″	–
3001306-100	0.438″ (7/16″)	0.500″ (1/2″)	0.030″	100ft	60 PSI	4″	–
3001537-25	0.500″ (1/2″)	0.625″ (5/8″)	0.063″ (1/16″)	25ft	100 PSI	3″	–
3001537-50	0.500″ (1/2″)	0.625″ (5/8″)	0.063″ (1/16″)	50ft	100 PSI	3″	–
3001537-100	0.500″ (1/2″)	0.625″ (5/8″)	0.063″ (1/16″)	100ft	100 PSI	3″	–
3001614-100	0.563″ (9/16″)	0.625″ (5/8″)	0.030″	100ft	50 PSI	5-1/2″	–
3001845-25	0.625″ (5/8″)	0.750″ (3/4″)	0.063″ (1/16″)	25ft	80 PSI	6″	–
3001845-100	0.625″ (5/8″)	0.750″ (3/4″)	0.063″ (1/16″)	100ft	80 PSI	6″	–
Metric Tubing
3010175-50	2mm	4mm	1mm	50ft	290 PSI	–	13mm
3010175-100	2mm	4mm	1mm	100ft	290 PSI	–	13mm
3010350-50	4mm	6mm	1mm	50ft	180 PSI	–	25mm
3010350-100	4mm	6mm	1mm	100ft	180 PSI	–	25mm
3010525-50	6mm	8mm	1mm	50ft	130 PSI	–	51mm
3010525-100	6mm	8mm	1mm	100ft	130 PSI	–	51mm
3010700-25	8mm	10mm	1mm	25ft	100 PSI	–	64mm
3010700-50	8mm	10mm	1mm	50ft	100 PSI	–	64mm
3010700-100	8mm	10mm	1mm	100ft	100 PSI	–	64mm
3010875-50	10mm	12mm	1mm	50ft	80 PSI	–	76mm

NOTE: Orders for 50 ft. lengths of PTFE tubing may be filled with a maximum of two lengths of product totaling 50 ft. Orders for 100 ft. lengths of PTFE tubing may be filled with a maximum of three lengths of product totaling 100 ft.

I.D. and O.D. dimensions are NOMINAL. Wall dimension is REFERENCE.
Working pressures are calculated from burst testing using a 4:1 safety factor. Application testing is recommended.