2840978-50 SILCON® By NewAge | MED-X | Platinum Cured Medical Grade Silicone Tubing | 1/8″ ID X 1/4″ OD X 1/16″ Wall | Natural | 50ft

SPECIFICATIONS

Application:	Beverage, Blood & Fluid Handling, Dialysis, Food, I.V. Administration, Laboratory, Medical, Personal Care, Pharmaceutical, Surgical Drains	Tube:	Silicone
Reinforcement:	Unreinforced	Cover:	N/A
Temperature Range:	400° F	Color:	Natural
Opacity:	Translucent	Specifications	Animal-Derived Ingredient Free, BPA Free, Latex Free, Phthalate Free, REACH, RoHS, USP class VI
Other Features:
Raw materials meet USP Class VI requirements Manufactured under good manufacturing procedures in a controlled environment Platinum cured for the highest degree of purity (least extractables) Reusable – will withstand repeated sterilization^ Translucent natural color for visual contact with the flow Applications include pharmaceutical, biomedical, health and beauty, food, and beverage handling Free of BPA, latex and phthalates REACH and RoHS compliant Made in the USA
Notes:
SILCON® MED-X tubing is made under good manufacturing procedures and conforms to the biocompatibility requirements of USP Class VI. SILCON® MED-X’s surface properties resist sticking and encrustation and will not support bacteria growth. The tubing is soft, pliable, and contains no plasticizers which could leach out, causing flow contamination or tube hardening. Other sizes and 60A durometer material are also available – contact support. Care is recommended in the selection and application of fittings and clamps as sharp barbed fittings or unlined metal clamps could tear into the wall. ^If exposed to repeated steam sterilization or long term high temperature or pressure, silicone will eventually relax and become gummy. It should then be replaced. SILCON® MED-X is supplied in individual, heat-sealed polybags and should be sterilized prior to use. SILCON® MED-X is not recommended for implantable or in-body uses or for continuous steam applications.

Physical Properties**
Hardness, Shore A ±5 – Liner	50
Tensile Strength, psi	1348
Elongation at Break, %	900
Tear Strength, Die B, ppi	250
Modulus at 100 %, psi	190
Brittle Temperature, °F	-100
Max. Operating Temperature, °F	400

**Values listed are typical for the material used in manufacture except where noted, apply to the hose liner except where noted, and are meant only as a guide to aid in design.
Field testing should be performed to find the actual values for your application.

Part Number	Inside Diameter (in.)	Outside Diameter (in.)	Wall Thickness (in.)	Length	Color
2840677-50	0.063″ (1/16″)	0.125″ (1/8″)	0.031″ (1/32″)	50 ft	Natural
2840684-50	0.063″ (1/16″)	0.188″ (3/16″)	0.063″ (1/16″)	50 ft	Natural
2840978-50	0.125″ (1/8″)	0.250″ (1/4″)	0.063″ (1/16″)	50 ft	Natural
2840985-50	0.125″ (1/8″)	0.313″ (5/16″)	0.094″ (3/32″)	50 ft	Natural
2841174-50	0.188″ (3/16″)	0.313″ (5/16″)	0.063″ (1/16″)	50 ft	Natural
2841181-50	0.188″ (3/16″)	0.375″ (3/8″)	0.094″ (3/32″)	50 ft	Natural
2841272-50	0.250″ (1/4″)	0.375″ (3/8″)	0.063″ (1/16″)	50 ft	Natural
2841279-50	0.250″ (1/4″)	0.438″ (7/16″)	0.094″ (3/32″)	50 ft	Natural
2841286-50	0.250″ (1/4″)	0.500″ (1/2″)	0.125″ (1/8″)	50 ft	Natural
2841370-50	0.313″ (5/16″)	0.438″ (7/16″)	0.063″ (1/16″)	50 ft	Natural
2841377-50	0.313″ (5/16″)	0.500″ (1/2″)	0.094″ (3/32″)	50 ft	Natural
2841468-50	0.375″ (3/8″)	0.500″ (1/2″)	0.063″ (1/16″)	50 ft	Natural
2841475-50	0.375″ (3/8″)	0.563″ (9/16″)	0.094″ (3/32″)	50 ft	Natural
2841482-50	0.375″ (3/8″)	0.625″ (5/8″)	0.125″ (1/8″)	50 ft	Natural
2841580-50	0.500″ (1/2″)	0.750″ (3/4″)	0.125″ (1/8″)	50 ft	Natural
2841678-50	0.625″ (5/8″)	0.875″ (7/8″)	0.125″ (1/8″)	50 ft	Natural