2802317-100 SILCON® By NewAge | Silicone Tubing | 1/2″ ID X 5/8″ OD X 1/16″ Wall | Natural | 100ft

SPECIFICATIONS

Application:	Appliances, Beverage, Computer Manufacture, Deionized Water Transfer, Dental, Duplicating Equipment, Food, Gaskets, Seals, & ‘O’-Rings, Hot Water Feeds, Insulation Sleeves, Laboratory, Medical, Peristaltic Pumps, Thermal Protection	Tube:	Silicone
Reinforcement:	Unreinforced	Cover:	N/A
Temperature Range:	500°F (NSF Max Operating Temp, 350°F)	Color:	Natural
Opacity:	Translucent	Specifications	NSF-51 listed for food equipment materials*
Other Features:
Raw materials meet FDA requirements per FDA 21 CFR 177.2600 for use with food contact surfaces Able to resist extreme temperature variation: -100°F to 500°F (350°F maximum for NSF applications) Translucent natural color for visual contact with the flow Resilient, stretchable, and resistant to compression set Reusable – will withstand repeated sterilization^ Odorless, tasteless, and inert Good electrical and weatherability properties – resists U.V., ozone, gases, and moisture Listed by the National Sanitation Foundation (NSF-51) for food equipment materials[U] Free of BPA, latex and phthalates REACH and RoHS compliant Made in the USA
Notes:
The most outstanding properties of SILCON® are its flexibility and resistance to temperature extremes. These, plus its good electrical properties and ability to self- extinguish, make SILCON® an excellent choice for appliances and computers. Peroxide-cured SILCON® contains no sulphur or other acid-producing chemicals, thereby eliminating the possibility of staining, corroding, or deteriorating materials it contacts. It is extremely resistant to ozone and U.V. over long time periods. Care is recommended in the selection of fittings and clamps for SILCON® as sharp barbed fittings or unlined metal clamps could tear into the tubing wall and possibly cause a failure. ^ SILCON® may be low pressure steam sterilized in-line or autoclaved at up to 250°F in a normal autoclaving cycle. However, if exposed to repeated steam sterilization or long- term high temperature or pressure, silicone will eventually relax and become gummy. It should then be replaced. Colors for industrial applications are available through minimum order – contact support. SILCON® is not recommended for implantable or in- body uses or for continuous steam applications.

Physical Properties**
Hardness, Shore A, ±5	50
Tensile Strength, psi	1444
Elongation at Break, %	608
Brittle Temperature, °F	-100
Tear Resistance, Die B, ppi	120
Modulus at 100%	186
Max. Operating Temperature, °F	500
Max. Operating Temperature for NSF, °F	350

**Values listed are typical and are meant only as a guide to aid in design. Field testing should be performed to find the actual values for the application.

Part Number	Inside Diameter (in.)	Outside Diameter (in.)	Wall Thickness (in.)	Length	Working PSI (at 70°F)	Color
2800084-100	0.063″ (1/16″)	0.125″ (1/8″)	0.031″ (1/32″)	100 ft	10 PSI†	Natural
2800161-100	0.063″ (1/16″)	0.188″ (3/16″)	0.063″ (1/16″)	100 ft	20 PSI†	Natural
2800315-100	0.094″ (3/32″)	0.156″ (5/32″)	0.031″ (1/32″)	100 ft	10 PSI†	Natural
2800392-100	0.094″ (3/32″)	0.219″ (7/32″)	0.063″ (1/16″)	100 ft	15 PSI†	Natural
2800469-100	0.125″ (1/8″)	0.188″ (3/16″)	0.031″ (1/32″)	100 ft	10 PSI†	Natural
2800546-100	0.125″ (1/8″)	0.250″ (1/4″)	0.063″ (1/16″)	100 ft	20 PSI†	Natural
2800623-100	0.125″ (1/8″)	0.313″ (5/16″)	0.094″ (3/32″)	100 ft	25 PSI†	Natural
2800700-100	0.125″ (1/8″)	0.375″ (3/8″)	0.125″ (1/8″)	100 ft	28 PSI†	Natural
2800854-100	0.156″ (5/32″)	0.281″ (9/32″)	0.063″ (1/16″)	100 ft	20 PSI†	Natural
2800931-100	0.156″ (5/32″)	0.344″ (11/32″)	0.094″ (3/32″)	100 ft	20 PSI†	Natural
2801008-100	0.188″ (3/16″)	0.250″ (1/4″)	0.031″ (1/32″)	100 ft	5 PSI†	Natural
2801085-100	0.188″ (3/16″)	0.313″ (5/16″)	0.063″ (1/16″)	100 ft	20 PSI†	Natural
2801162-100	0.188″ (3/16″)	0.375″ (3/8″)	0.094″ (3/32″)	100 ft	20 PSI†	Natural
2801239-100	0.188″ (3/16″)	0.438″ (7/16″)	0.125″ (1/8″)	100 ft	15 PSI†	Natural
2801393-100	0.250″ (1/4″)	0.313″ (5/16″)	0.031″ (1/32″)	100 ft	10 PSI†	Natural
2801470-100	0.250″ (1/4″)	0.375″ (3/8″)	0.063″ (1/16″)	100 ft	5 PSI†	Natural
2801547-100	0.250″ (1/4″)	0.438″ (7/16″)	0.094″ (3/32″)	100 ft	20 PSI†	Natural
2801624-100	0.250″ (1/4″)	0.500″ (1/2″)	0.125″ (1/8″)	100 ft	15 PSI†	Natural
2801778-100	0.313″ (5/16″)	0.438″ (7/16″)	0.063″ (1/16″)	100 ft	10 PSI†	Natural
2801855-100	0.313″ (5/16″)	0.500″ (1/2″)	0.094″ (3/32″)	100 ft	10 PSI†	Natural
2801932-100	0.375″ (3/8″)	0.500″ (1/2″)	0.063″ (1/16″)	100 ft	10 PSI†	Natural
2802009-100	0.375″ (3/8″)	0.563″ (9/16″)	0.094″ (3/32″)	100 ft	10 PSI†	Natural
2802086-100	0.375″ (3/8″)	0.625″ (5/8″)	0.125″ (1/8″)	100 ft	10 PSI†	Natural
2802163-100	0.375″ (3/8″)	0.750″ (3/4″)	0.188″ (3/16″)	100 ft	15 PSI†	Natural
2802240-100	0.438″ (7/16″)	0.625″ (5/8″)	0.094″ (3/32″)	100 ft	10 PSI†	Natural
2802317-100	0.500″ (1/2″)	0.625″ (5/8″)	0.063″ (1/16″)	100 ft	5 PSI†	Natural
2802394-100	0.500″ (1/2″)	0.688″ (11/16″)	0.094″ (3/32″)	100 ft	5 PSI†	Natural
2802471-100	0.500″ (1/2″)	0.750″ (3/4″)	0.125″ (1/8″)	100 ft	10 PSI†	Natural
2802548-100	0.500″ (1/2″)	0.875″ (7/8″)	0.188″ (3/16″)	100 ft	10 PSI†	Natural
2802625-100	0.625″ (5/8″)	0.750″ (3/4″)	0.063″ (1/16″)	100 ft	5 PSI†	Natural
2802702-100	0.625″ (5/8″)	0.813″ (13/16″)	0.094″ (3/32″)	100 ft	5 PSI†	Natural
2802779-100	0.625″ (5/8″)	0.875″ (7/8″)	0.125″ (1/8″)	100 ft	5 PSI†	Natural
2802856-100	0.625″ (5/8″)	1.000″	0.188″ (3/16″)	100 ft	10 PSI†	Natural
2803087-50	0.750″ (3/4″)	1.000″	0.125″ (1/8″)	50 ft	5 PSI†	Natural
2803164-50	0.750″ (3/4″)	1.125″ (1-1/8″)	0.188″ (3/16″)	50 ft	10 PSI†	Natural

Working pressures are calculated from burst testing using a 3:1 safety factor. Application testing is recommended.
* If used in an NSF application, the maximum operating temperature is limited to 350°F.
† Performed on hydrostatic test equipment at ambient temperature; based on the ASTM D1599 method.