2000999-100 SUPERTHANE® By NewAge | Polyurethane PU Tubing | Ester | 0.250″ ID X 0.500″ OD X 0.125″ Wall | Clear | 100ft

Application:	Cable Jacketing, Clean Liquids, Computer Manufacture, Fuel Lines(Small Motor), Gases, Granular Materials, Grease & Lubrication Lines, Instrumentation, Insulation Sleeves, Internal Contamination Fluids, Metering Pumps, Nuclear Power Facilities, Pressure Measuring Devices, Robotics, Slurry Transfer, Vacuum Lines, Washers & Bumpers	Tube:	Polyurethane
Reinforcement:	Unreinforced	Cover:	N/A
Temperature Range:	185°F	Color:	Clear
Opacity:	Transparent	Specifications	Animal-Derived Ingredient Free, BPA Free, Conflict Mineral Free, DEHP Free, FDA, Phthalate Free, REACH, RoHS
Other Features:
Available in Ester or Ether formulations Both formulations made from non-toxic raw materials conforming to FDA standards for use with wet and fatty food contact surfaces Extremely resistant to weathering†, tearing, impact, radiation, and abrasion Transparent, flexible, resilient, tough; resistant to oils, greases, and fuels†† Wide range of temperature resistance: -85°F to 185°F (ester) Ether-based raw material is listed by the National Sanitation Foundation (NSF 61) for use with potable water Ester-based raw material is free of animal derived components and REACH compliant Free of DEHP, phthalates, BPA and conflict minerals RoHS compliant Can be heat sealed, coiled, fabricated, or bonded Made in the USA
Notes:
†Hydrolytic Stability – For resistance to moisture and fungi, SUPERTHANE® ether is recommended. (Ester polyurethane does not react well with water, prolonged humid conditions, or attack from fungi.) The raw material used in its manufacture is listed by the National Sanitation Foundation (NSF 61). SUPERTHANE® is much more resistant to pressure and vacuum applications than corresponding sizes of PVC or rubber. ††Although polyurethane is commonly used in fuel applications, due to additives in today’s gasoline and petroleum products, field testing should be performed. When used with Thermobarb® fittings, SUPERTHANE® will not require clamps, provided that working pressures remain at or below 105 psi at ambient temperature. For easy identification, SUPERTHANE® is imprinted with the trademarked name.

Physical Properties**
	ESTER	ETHER
Hardness, Shore A ±5	85	85
Tensile Strength, psi	6100	7500
Elongation at Break, %	490	500
Brittle Temperature	-85°F	-85°F
Max. Operating Temperature	185°F	175°F

**Values listed are typical and are meant only as a guide to aid in design. Field testing should be performed to find the actual values for the application.

Part Number	Inside Diameter (in.)	Outside Diameter (in.)	Wall Thickness (in.)	Length	Working PSI (at 70°F)	Opacity	Colors	Weight (lbs/100ft)
2000075-100	0.063″	0.125″	0.031″	100 ft	135 PSI	Transparent	Clear	0.48 Lbs
2000152-100	0.125″	0.188″	0.031″	100 ft	72 PSI	Transparent	Clear	0.79 Lbs
2000229-100	0.125″	0.250″	0.063″	100 ft	130 PSI	Transparent	Clear	1.92 Lbs
2000383-500	0.170″	0.250″	0.040″	500 ft	70 PSI	Transparent	Clear	1.37 Lbs
2000460-100	0.188″	0.250″	0.031″	100 ft	27 PSI	Transparent	Clear	1.13 Lbs
2000537-100	0.188″	0.313″	0.063″	100 ft	74 PSI	Transparent	Clear	2.55 Lbs
2000768-100	0.250″	0.313″	0.031″	100 ft	33 PSI	Transparent	Clear	1.42 Lbs
2000845-100	0.250″	0.375″	0.063″	100 ft	67 PSI	Transparent	Clear	3.19 Lbs
2000845-1000	0.250″	0.375″	0.063″	1000 ft	67 PSI	Transparent	Clear	3.19 Lbs
2000999-100	0.250″	0.500″	0.125″	100 ft	131 PSI	Transparent	Clear	7.66 Lbs
2001076-100	0.313″	0.438″	0.063″	100 ft	65 PSI	Transparent	Clear	3.83 Lbs
2001153-100	0.313″	0.500″	0.094″	100 ft	75 PSI	Transparent	Clear	6.24 Lbs
2001230-100	0.313″	0.563″	0.125″	100 ft	118 PSI	Transparent	Clear	8.93 Lbs
2001307-100	0.375″	0.500″	0.063″	100 ft	59 PSI	Transparent	Clear	4.47 Lbs
2001384-100	0.375″	0.563″	0.094″	100 ft	84 PSI	Transparent	Clear	7.16 Lbs
2001461-100	0.375″	0.625″	0.125″	100 ft	100 PSI	Transparent	Clear	10.22 Lbs
2001615-100	0.438″	0.688″	0.125″	100 ft	80 PSI	Transparent	Clear	11.48 Lbs
2001692-100	0.500″	0.625″	0.063″	100 ft	36 PSI	Transparent	Clear	5.75 Lbs
2001846-100	0.500″	0.750″	0.125″	100 ft	60 PSI	Transparent	Clear	12.77 Lbs
2002000-100	0.625″	0.813″	0.094″	100 ft	54 PSI	Transparent	Clear	10.98 Lbs
2002077-100	0.625″	0.875″	0.125″	100 ft	60 PSI	Transparent	Clear	15.33 Lbs
2002231-50	0.750″	1.000″	0.125″	50 ft	51 PSI	Transparent	Clear	17.88 Lbs
2002231-100	0.750″	1.000″	0.125″	100 ft	51 PSI	Transparent	Clear	17.88 Lbs
2002385-100	0.875″	1.125″	0.125″	100 ft	33 PSI	Transparent	Clear	20.43 Lbs
2002539-100	1.000″	1.250″	0.125″	100 ft	40 PSI	Transparent	Clear	22.99 Lbs

Working pressures are calculated from burst testing using a 3:1 safety factor. Application testing is recommended.
Tolerances: ID & OD ±3% but not less than ±.005″.